Browse all practice questions for the ALBAT: OSHA Electrical Transmission and Distribution (ET&D) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

ALBAT: OSHA Electrical Transmission and Distribution (ET&D) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • The weight of spoils can cause
  • Why do you keep spoils and equipment away from the edge of an excavation?
  • Permit spaces are more dangerous than non-permit spaces. True or False?
  • Prior to removing a manhole cover, you must check to see if the cover is what?
  • Which of the following describes a switching order and who is responsible for its approval and execution?
  • When should job briefings be performed for repetitive and similar operations?
  • Which space is described as a working space such as a manhole, vault, tunnel, or shaft?
  • What program requires employers to ensure overhead power lines are de-energized?
  • Which statement is true about confined spaces and permits?
  • Which item is not part of the PPE items typically provided by employers?
  • What is a clearance and what is its role in safe ET&D operations?
  • Which statement defines a Non-Permit Confined Space?
  • Arc Thermal Performance Value (ATPV) is defined as which of the following?
  • What does a trench box help prevent?
  • Wood, 50 kV per foot for ____ minute.
  • Which item defines the minimum strength requirement for lanyards and vertical lifelines in fall protection?
  • Which of these are types of electrical injury?
  • How can you differentiate a switching device from an overcurrent protective device, and what responsibilities accompany each?
  • How do voltage and current relate to electrical hazard in ET&D?
  • You should always lift with your ____ and avoid twisting.
  • What is the purpose of an electrical safety program audit?
  • Describe the elements of a written switching procedure and why it is required for transmission/distribution work.
  • What is the maximum slope angle allowed without using alternative configurations?
  • Which term describes the physical separation of equipment from all energy sources to prevent energization?
  • What is the role of Lockout/Tagout (LOTO) in ET&D safety?
  • It is okay to call a stop if work is not following the job briefing.
  • What is the purpose of air testing rubber gloves and sleeves before use?
  • What is sloping in trenching?
  • Who is responsible for ensuring that overhead power lines are de-energized?
  • What does the acronym MAD stand for in electrical safety contexts?
  • Which term corresponds to the entrance into a space?
  • A trench is defined as a narrow excavation in which depth is greater than width, and no wider than how many feet?
  • What does NFPA 70E contribute to OSHA ET&D requirements?
  • What is a primary purpose of FR and AR clothing?
  • Why is it important to keep work areas clean and dry when performing ET&D tasks?
  • A qualified worker is someone who is knowledgeable in the construction and operation of the electric power generation, transmission, and distribution equipment involved, along with the associated hazards.
  • What is a trench box?
  • Which agency should you contact to file an OSHA-related complaint?
  • What is the role of boundary signage and boundary controls when working in the field?
  • What oxygen concentration threshold prohibits entry into excavations?
  • What action cannot an employer take against an employee who files a safety complaint?
  • How do you avoid hazards when working near an excavation?
  • Which statement correctly describes installing ground ends first and removing them last?
  • Arc Thermal Performance Value is measured in which unit?
  • Dorsal D Rings must sit over the spine and just below the ______.
  • What is the retaining device's purpose?
  • What is the exception of storage for handling and use of flammable liquids in quantities of 5 gallons or less?
  • Which atmosphere-related hazard is commonly associated with confined spaces?
  • What is a minimum approach distance (MAD) and why is it important?
  • General Requirements state that protective systems must be in place, except when which condition applies?
  • What is ground-fault protection and where is it typically required in distribution networks?
  • Which statement about unprotected trenches is true?
  • A spoil pile must be kept at least how far back from the edge of a trench or excavation?
  • During switching operations, why is it important to verify isolation before re-energizing?
  • Which soil conditions can greatly increase soil weight?
  • What is a work permit and how does it relate to energized work?
  • When appropriate, energy-control procedures must also address what?
  • If an enclosed space structure begins to fail, you should
  • When do you need to temporarily haul spoils to another location?
  • OSHA states the only acceptable storage and handling containers for flammable liquids are
  • What tools and equipment are used for live-line work and what standards govern their use?
  • What is the importance of guarding and enclosures around exposed energized parts?
  • Anchorage must support 3,000 pounds for work-positioning and ______ pounds for fall protection.
  • What is the proper approach when working near energized equipment in wet conditions?
  • Why is maintaining records of PPE inspection and maintenance important?
  • How is arc flash boundary determined and what factors influence its size?
  • How are arc flash boundaries changed by enclosure type and protective device settings?
  • When is the two-person rule typically applied in ET&D work and what purpose does it serve?
  • In the context of LOTO, what is the primary purpose of a tag?
  • What is a form of retaining device?
  • How many pounds must the anchorage for work-positioning support?
  • For lines and equipment energized to 50 kV or less, the distance is ____ feet.
  • Bonding jumpers during maintenance are used to maintain the same electrical potential between parts to prevent potential differences during testing; when is this done?
  • PPE and arc-flash protection are typically required for ET&D tasks and how is incident energy determined?
  • Which statement best describes ATPV as used in electrical safety?
  • Which atmosphere-related hazard is commonly associated with enclosed spaces?
  • What should be tested for before grounding and bonding?
  • What is the purpose of protective grounding (temporary grounds) during testing or maintenance on energized equipment?
  • Electrical pressure is created by electromotive force and is measured in units of what?
  • For FRP, 75 kV per foot for ____ minute.
  • Establish energy-control procedures for?
  • Which statement best describes energized work and non-energized work and typical restrictions for each?
  • Egress means which of the following?
  • What is the role of protective grounds in switching operations?
  • What are live-line tools and what maintenance is required for them before use?
  • What is the purpose of insulating blankets and their proper placement during energized line work?
  • Why is Lockout/Tagout essential in switching operations?
  • Which body part should be used to lift to avoid back strain?
  • There are two types of shoring.
  • Spoil refers to
  • Why is communication critical during switching and energized work, and which forms of communication are recommended?
  • What is the main safety purpose of the two-person rule in ET&D work?
  • What is the significance of an incident energy calculation in selecting PPE, and how often should it be updated?
  • Which action most directly reduces the risk of a cave-in related to spoils near the trench edge?
  • Which of the following is a unit of electrical pressure?
  • Describe the steps for re-energizing equipment after maintenance is complete.
  • What does ATPV stand for?
  • What is the best practice for air testing rubber gloves and sleeves?
  • What is transmission line sag and why is it important for clearance calculations?
  • For lines and equipment energized beyond 50 kV, the distance is 10 feet plus ______ inches for each additional 10 kV.
  • How do you determine whether a transformer requires insulating rupture or steps to avoid arc energy?
  • What are the essential elements of an electrical safety program for ET&D?
  • Which statement best defines a qualified person in OSHA ET&D work?
  • How do tagging and locking differ in LOTO, and how do they function?
  • In a personal fall restraint system, lanyards and vertical lifelines must have a minimum breaking strength of?
  • What is the role of Lockout/Tagout (LOTO) in switching operations?
  • What is the purpose and use of temporary protective grounds, and when are they installed?
  • What is the purpose of a bonding jumper and when is it used during maintenance?
  • What is the four-foot maximum distance between the lowest hydraulic cylinder and the trench floor?
  • What is the purpose of lockout/tagout (LOTO) in electrical work and when must it be applied?
  • During PPE inspection, which item is NOT typically checked?
  • What is a switching order in distribution operations and what information does it contain?
  • If you have been punished for using OSHA-protected rights, within how many days must you file a complaint?
  • What constitutes proper PPE inspection and maintenance prior to use in ET&D tasks?
  • What is the base distance before increments for voltages beyond 50 kV?
  • A job briefing should be held again when which occurs?
  • What is a key reason to verify de-energization after applying lockout/tagout?
  • For live-line work, what is required about tool ratings and inspection?
  • Which statement best distinguishes grounding from bonding in ET&D work, and when each is applied?
  • Who is responsible for paying for personal protective equipment (PPE)?
  • Which sequence correctly outlines the steps in a typical switching operation?
  • What steps are taken to verify the absence of voltage before starting work on electrical equipment?
  • For flammable liquids that are highly viscous or extremely hard to pour, which storage option is allowed?
  • What action is recommended if an enclosed space structure begins to fail?
  • Which standard mandates that flammable liquids be stored in approved containers and in an approved closable fireproof self-closing cabinet?
  • Under excavation safety, which is considered the greatest hazard?
  • How do you interpret a clearance notice boundary and ensure compliance during work in the field?
  • The energy-control program is intended to prevent what during maintenance?
  • Which statement best describes the distance rule as voltage increases?
  • How do you test rubber gloves for defects?
  • Job site visitors require a briefing.
  • What is the name of the complaint an employee may file for retaliation for safety complaints?
  • Which statement defines a Non-Permit Confined Space?
  • What should incidents be documented and reported to achieve in an electrical safety program?
  • What energy sources should energy-control procedures address besides removing energy from machines?
  • How often must a competent person inspect fall protection equipment?
  • How shall rubber blankets be stored?
  • Which engineering control could be used in urgent or emergency dental settings?
  • What is the main cause of crane accidents?
  • Which statement describes the two essential elements of a lockout/tagout program?
  • What is the typical soil weight per cubic foot?
  • Which statement best describes a Confined Space?
  • When a visitor comes onto the job site, you must
  • When is a job briefing required?
  • Which organization's Threshold Limit Values (TLV) are used to establish exposure limits for airborne contaminants?
  • When must a job briefing occur?
  • Which statement about spoil near the edge is correct?
  • What steps should be taken if a fault occurs during switching operations?
  • What hazards are associated with overhead transmission and distribution lines, and how are they mitigated?
  • What is the role of a spotter during live-line operations?
  • For transformer tasks, PPE and safe work practices are established based on which factors?
  • Enclosed Space is best described as which of the following?
  • Differentiate between a circuit being de-energized and isolated; why is verification essential?
  • How many pounds must the anchorage for fall protection support?
  • What tool is used to install and remove jumpers?
  • How many inches are added for each additional 10 kV beyond 50 kV?
  • What should be included in a job briefing for electrical work?
  • What are some items that warrant updating a job briefing?
  • What should you do when a visitor arrives on site?
  • Which PPE items are typically purchased by the company?
  • What is the function of a one-line diagram and a physical layout map in ET&D tasks?
  • What are the criteria for performing work on or near exposed energized parts?
  • Which term describes electrical pressure created by electromotive force?
  • Which item is explicitly listed as PPE that the company should provide?
  • For handling and use of flammable liquids in quantities of 1 gallon or less, what is the required storage?
  • A briefing is required before work and when conditions change.
  • What causes nearly 45% of crane accidents?
  • Which term best describes the entrance into a space?
  • Job site visitors do not need a briefing.
  • What is the maximum distance between the top edge of each rail and its highest hydraulic cylinder?
  • Which term describes excavated material at a job site from a trench or excavation?
  • Which components are typical in a feeder supplying a load?
  • What is the purpose of re-energizing per procedure in switching operations?
  • Which statement about tool and equipment storage around energized equipment is correct?
  • What is the minimum clearance to energized lines of unknown voltage?
  • What should you do if anything changes from what was posted on the job briefing?
  • Competent Person.
  • What is the purpose of PPE in ET&D and give examples?
  • Define a feeder in distribution and name typical components involved in feeding a load.
  • Which of the following is a valid container for storing flammable liquids according to OSHA guidance?
  • What is incident energy and how can it be controlled in the field?
  • Employees working at depths of four feet or greater must have a means of ingress and egress, such as a ladder or ramp, that requires a maximum of _______ feet of lateral travel for them to reach.
  • MAD stands for?
  • Which method is recommended for testing rubber gloves for defects?
  • Which circuits in a distribution network typically require ground-fault protection?
  • What is the minimum distance for lines energized at 110 kV, before applying the per-10 kV increment?
  • Which factor most directly determines the PPE category required for arc flash protection?
  • Flammable liquids must be stored in
  • OSHA states the only things that can be used for storage and handling of flammable liquids is
  • What must you always use when attaching grounds?
  • What is the Minimum Approach Distance (MAD) and how does it affect work near energized lines?
  • When must employers provide PPE?
  • How often must a competent person inspect rigging equipment?
  • How is a clearance established and what documentation is typically required?
  • Which statement best describes a Permit Required Confined Space?
  • A trench box serves primarily as what type of device?
  • What are the main hazards associated with switching operations and how are they mitigated?
  • NFPA 30 primarily addresses the storage and handling of what?
  • What is the maximum allowed free fall distance for a personal fall arrest system?
  • Ingress means which of the following?
  • Which of the following is a way to field test rubber insulating gloves?
  • How far can an excavation extend below the bottom of the trench box without further analysis?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy